Vintage Motorcycles

Clive Brown rides with history

  • Feb. 5, 2020 7:30 a.m.

– Story by Maggie Jackson Photography by Don Denton

Clive Brown, owner of Pizzability on the West Shore, loves buying, restoring, fixing and riding vintage motorcycles. His garage and basement are filled with vintage bikes. The wall of his garage is lined with Iron Butt Association certificates, a few earned while riding his classic bikes. “You must complete a 1,000 mile (1,600 km) in 24 hours ride, fully documented with receipts etc. with a witness to sign the paperwork at the start and end of the ride, before you do any of the extreme rides” Clive explained. “I think I have about 40 certificates, including numerous extreme and theme rides.”

Clive has always loved vintage motorcycles. “When I was six, I found my grandfather’s Rudge in the garage. I was in awe of all the controls. It was so big and huge and screamed adventure. I wondered what my grandfather did on that motorcycle; where he went and what he saw.”

When he was eleven, Clive’s dream of owning a motorcycle came true. “My older cousin gave me a Triumph Tiger Cub that didn’t run. He told me I could have it if I could fix it. We brought it home and pushed it up and down the streets for a month trying to get it started. It finally started when it was my turn to “ride” it. It must have been a fuel issue, as carburetors get gummed up. Once we got it started, my mother told me it had to go!”

At 14, Clive and his family emigrated from England to Alberta. To Clive’s delight he discovered being 14 meant he could get a motorcycle licence. He bought a Honda CB 100, then a 1976 Suzuki GS750.

Clive’s love of classic bikes is entrenched into his life. “While I love super high-tech bikes, the appeal of the classics is that they aren’t high-tech. They have carburetors and points and if something happens to them I can fix them at the side of the road.”

While he has plenty of classic motorcycles to enjoy, there’s still one that he’d like to get. “My most desired motorcycle is a 1937 Rudge. It was prewar so it had a girder front end with a huge headlight. They’re so classic and unique in the way they were constructed and engineered. It had linked brakes which was unheard of until they were subsequently introduced in the Goldwing.”

Three classics Clive is particularly fond of are his: Jawa Perak, Chang Jiang and FZR250 Yamaha.

“The Jawa Perak has the best history,” Clive said. “The prototype was manufactured and 20,0000 km put on it during the Nazi occupation of Czechoslovakia during WWII. They weren’t allowed to work on anything that wasn’t related to the Nazi war effort. The Czechs, right under the noses of the Nazis, engineered this 250 cc dual exhaust port two stroke motorcycle. They got away with it by putting a fake SS licence plate on the back. When stopped, they told the guards it was a secret SS project. They named the bike Perak, which has two meanings: mythical super hero or a cell of freedom fighters. The motor is a work of art, very art deco to look at. Gearheads see it as a thing of beauty. The bike was introduced in 1948 at the World’s Fair and took the gold medal.”

The Chang Jiang came to Clive partially restored. “These motorcycles are assembled in China from a huge inventory of parts. The Chinese government had set up factories to just have people make things. In many cases they were way overproduced. Once they stopped producing parts, some independents started purchasing them and putting motorcycles together.”

The actual manufactured year of Chang Jiangs are a grey area. “Mine is registered as a 1968 motorcycle, but it could have been put together a few years ago from 1968 parts,” Clive explained. “The vast majority you will see are a compilation of parts put together by independent companies in China. The Chinese government has now put a stop to their export.”

The name Chang Jiang means long river and is named after the Yangtze River. “Most of them came with sidecars although some can be purchased without,” Clive said. “They have a reputation for being incredibly unreliable. However, I toured northern WA with my wife, fully loaded, and it never broke down. The key is preventative maintenance. You have to play with them. I spend two days checking everything and during the trip I check it again at least once a day.”

Then there’s Clive’s newest classic, the 1988 FZR250 Yamaha. “This was a Japanese market motorcycle with an EXUP (electronically controlled) exhaust. This one still has that in pristine condition. It redlines at 18,000 RPM. It’s a race bike for the street.”

JAWA PERAK

Year: 1953

Make: Jawa

Model: Perak 250

Mileage: 3,400 km since restoration

Motor: single cylinder with dual port

250 CC two stroke.

Restoration: Absolutely everything was restored, every nut and bolt.

Manufactured: 1948 to 1954 in Czechoslovakia

CHANG JIANG

Year: 1968

Make: Chang Jiang CJ750

Model: M1S

Mileage: 11,000 km – original mileage

Motor: Boxer 750 CC – 12 volt with overhead valves with reverse.

Looks like a BMW motor

Restoration:

Mostly cosmetic restoration including, seat, handle bar and controls, wheels carburetor, minor cosmetics/nuts/bolts restored. Side car somewhat restored on the interior and the windshield. All lighting upgraded to LED.

Manufactured: early 1960s in China, ceased assembling around 2018

YAMAHA

Year: 1988

Make: Yamaha

Model: FZR250

Mileage: 18,000 original km

Motor: 250 CC, 4 cylinder, 4 stroke

Restoration: Bike is basically all original

Manufactured: This exact model made only in 1988 in Japan

From West Shore Life + Style magazine

LifeLifestylemotorcycle

Get local stories you won't find anywhere else right to your inbox.
Sign up here

Just Posted

Interior Health officials outline pandemic response in virtual town hall

Kelowna-Lake County MLA Norm Letnick moderates digital discussion, Q&A with Interior Health leadership

Second Vernon-area high school exposed to COVID-19

Kalamalka Secondary School staff, students urged to self-isolate if showing symptoms

Regional District of Okanagan Similkameen cancels April 2 meeting

Staff working to install videoconferencing system during COVID-19 pandemic

Significant snowfall forecast for Interior mountain passes

Allison Pass, the Okanagan Connector, Rogers Pass and Kootenay Pass could see 15 to 25 cm of snow

Community newspapers bring people together in time of isolation

Black Press offices have been receiving calls of support, appreciation

Trudeau announces 75% wage subsidy for small businesses amid COVID-19

This is up from the previously announced 10 per cent wage subsidy

VIDEO: Penguins roam empty halls of Vancouver Aquarium

COVID-19 has forced the Vancouver Aquarium to close access to guests – leaving room for its residents

Kids get back to learning in B.C., online

Ministry of Education rolls out new tool for school

67 more B.C. COVID-19 cases, two more deaths in Vancouver region

Positive tests found in Surrey, Langley long-term care facilities

‘Corona Busters’: Vernon man drives vintage ambulance in appreciation of health-care workers

Rob Newport says he aims to make people smile during the COVID-19 pandemic with Ghostbusters-themed ride

‘Now is not the time to bag that peak’: BCSAR manager discourages risky outdoor adventures

Call volumes are not going down, even as the COVID-19 pandemic persists

Food Banks BC already seeing surge in demand due to COVID-19 pandemic

Executive director Laura Lansink said they expect applications will keep increasing

Nanaimo couple caught aboard cruise ship with four dead and COVID-19 present

Four ‘older guests’ have died on Holland America’s Zaandam; cruise line confirms two COVID-19 cases

Frontline workers receiving COVID-19 isolation exemptions prompt concerns

Provincial Health Authority staff exempt from self-isolation upon return from international travel

Most Read